Basic Fitted Electric Blanket

WARNING:

• Ensure you have the correct size blanket for the size of mattress.
• Ensure there are no creases or fold when fitted and that the controller is on the outside of the bed and covers.
• Do not use as an over blanket.
• Do not use if wet.
• Do not use if elements or cables are damaged.
• Not to be used with young children (0-3years).
• Do not plug the electric blanket into a power board or double adaptor. The plug must be connected directly to the mains wall socket.
• When storing the blanket, allow it cool down before folding. Fold neatly not tightly (or rolled) without sharp bends in the heating elements and store where not other heavy objects will be placed upon it.
• The blanket should be examined frequently for signs of wear, either of the blanket, controller or flexible
  cord. If wear is visible or if any abnormality or defect in operation in the blanket is observed, discontinue
  use immediately and consult a qualified and registered person for service.
• For additional protection, it is strongly recommended that the use of a residual current device (RCD) with
  a tripping current not exceeding 30mA be used on the circuit supplying this product. If you are unsure if
  your home has this device, please contact your nearest Electrical Contractor.
• After prolonged storage, always inspect your blanket for wear and tear and ensure that there are not kinks or cuts in the electrical cords before using.