Self Adhesive 3D Tiles, 5 Pack - Anko

Additional Information

• Suitable for indoor use only
• Instructions to use:
  • 1. Clean the surface where you wish to apply the tile. Thoroughly clean surface with a degreaser then allow to completely dry.
  • 2. Starting from the left side, trace guidelines on your surface with a level or chalk to align the placement of tiles.
  • 3. Using a ruler cut the left part of your left tile to required size, along a straight line.
  • 4. Peel back the first 5cm of the backing without touching the adhesive surface. Align the tile carefully along the guideline while applying light pressure from left to right. Press firmly once applied.
  • 5. Align the tiles carefully from left to right along the guideline and only overlap where the pattern matches.
  • 6. You are now complete.
• Installation ideas: Self-adhesive tiles are DIY, easy to use and can update your home without the cost of renovating. These tiles are suitable for use on kitchen backsplashes, bathroom backsplashes, worktops, tabletops, bedrooms, living rooms and other flat surfaces. This self-adhesive tile doesn't require grouting or cementing and is easy to clean by wiping with a damp cloth and mild detergent.
• Recommended surfaces: Smooth ceramic tiles backsplash, smooth glass tiles backsplash, wall panel (acrylic), mirrors, smooth painted gypsum, stainless metal and laminate.
• Non-Recommended surfaces: Brick wall (not sufficiently flat), stone wall (not sufficiently flat), unfinished wall such as gypsum or plaster (this requires primer paint first), stucco wall (not sufficiently flat), unpainted plywood (paint with primer before installing tiles), shower wall and oily wall.

Caution: To install tiles behind a gas cooktop without a protective rear panel, leave an area of 20cm between the tiles and any open flame. Follow usage instructions carefully.
Warning: While these tiles have been tested on the recommended surfaces above in varying conditions, we cannot guarantee that under all circumstances the material will stay completely intact, that the product will properly adhere to the surface or that no adhesive will remain on the surface when removed. Follow usage instructions carefully.